Language 
PRODUCTS
- PRODUCTS
- PRODUCT CATEGORY
Fax: 86-519-85120170-8017
E-mail: sales@zctek.com.cn
Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China.
The ZC2683 insulation resistance tester is a general-purpose instrument that can meet the insulation performance testing of various electronic components, dielectric materials, equipment, etc. as indicated by the pointer. It has the characteristics of fast test speed, good stability, and bad judgment.
Intelligent microprocessor control
Built-in constant current linear amplifier for accurate output
30A/510mQ application range
Automatic compensation of test line impedance, 5 sets of test program memory
Key-in software calibration, keyboard security lock
Can be connected with a withstand voltage tester for automatic testing
The ZC2682 insulation resistance tester is a universal one, which can satisfy various electronic components as indicated by the pointer. Dielectric materials, equipment and other insulation performance testing instruments. It has the characteristics of fast test speed, good stability, and bad judgment.
The ZC2516 series of intelligent low resistance testers are dedicated to testing various resistances. The 24-bit color 4.3-inch color LCD screen with touch function is easy to operate and fast. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three additional sorting functions. In the sorting state, the resistance value or the percentage value can be selected to be displayed, and the resistance value can be judged to be too large, too small or good according to the set value. There is a sorting interface on the rear panel of the instrument, enabling the interface start signal to make the instrument perform measurement, and the test result is output from the interface on the rear panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. . In addition, the machine has a USB interface and a Handler port. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer through the USB interface or the USB interface for storage, or the data can be directly stored in the U disk for storage.
The ZC2817DX series LCR digital bridge is a new generation product of the company's newly developed low-frequency component measuring instrument, which applies the latest technology of multiple component measurement, 4.3-inch color LCD display, SMD patch technology, convenient operation and beautiful appearance. It can directly measure up to six component parameter combinations, which can meet the needs of production line quality assurance, incoming inspection and automated production. The RS-232 interface can provide users with remote control and statistics and analysis of test data. The HANDLER interface can be connected to an automatic component sorting system.
The ZC73 series AC and DC withstand voltage/insulation resistance tester is a newly designed 500VA high-power with a maximum output of 5kV/100mA, which meets the requirements of high-power withstand voltage testing and meets the equipment safety standards of EN50191. Based on the basic AC, DC, and insulation resistance tests, the ZC73 series adds a breakdown voltage test function, which can analyze the breakdown point voltage of the product; it also has an open and short circuit detection function, which solves the user’s reliability when testing safety products. For issues of performance and accuracy, contact inspections are performed synchronously during output to avoid missed inspections and improve test reliability and efficiency. At the same time, the floating output design, electric shock protection function, etc., will not be injured by electric shock even when the high voltage test terminal is accidentally touched, which protects the safety of the operator and has no worries during operation.
ZC2829A series component tester is a new impedance measuring instrument with high accuracy, wide test range and 6-bit test resolution. The test frequency up to 500kHz, arbitrary programming in 0.01Hz steps, 5mV-2V signal level and DC built-in bias voltage, can meet the measurement requirements of most low-voltage parameters of the component, and can be widely used in inductors, capacitors, etc. Performance analysis of components. The HANDLER (optional), GPIB (optional), LAN, RS232C, and USB HOST interfaces provided by the instrument provide sufficient conditions for the instrument to be used in the component automatic sorting system, to communicate with the computer, and to record the test process.
ZC2818A high-frequency precision LCR digital bridge is an impedance measuring instrument with high measurement accuracy, wide test range, 6-bit test resolution, test frequency up to 300kHz, arbitrary programming at 0.01Hz steps, 10mV~2V signal level It can meet the requirements of production line quality assurance, incoming inspection and laboratory high-precision measurement. The HANDLER and RS232C interfaces provided by the instrument provide conditions for the instrument to be used in the automatic component sorting system, communicate with the computer and record the test process.
The ZC2816A/B precision LCR digital bridge is the company's latest new generation of component parameter test equipment. This product integrates the company's many years of mature experience in component testing and uses the latest test technology in this field. The powerful test function and superior measurement performance make this product squeeze among the advanced level of the same kind in the world, and the combination of low price will give our customers super value enjoyment. The product can provide a stable 6-bit test resolution, a frequency range of 50Hz-200kHz, a programmable signal level of 0.01V-2.0V, a measurement speed of up to 30 times per second, 9-level fine range, and a constant 30Ω or 100Ω source Restricted and flexible and user-friendly operation mode, it can meet the requirements of production line quality assurance, incoming inspection and laboratory high-precision measurement. The HANDLER, GPIB and RS232C interfaces provided by this product create good conditions for the instrument to be used in the component automatic sorting system to communicate with the computer and to record the test process.
As an upgraded model of the original ZC1681 series, the ZC5820 multi-channel speaker life tester has changed the original MCU control to an industrial computer, providing a basis for realizing instant communication, remote control and other intelligent operations. This is a multi-channel, multi-function power test equipment. The user can store the test signal in the computer and play it through a professional sound card, and its stability is greatly improved; the parameters of the signal after power amplification are guaranteed to be consistent with the original signal. Each output has a separate measurement system, which can measure the actual voltage, current, DC resistance, temperature rise, product status and other data of each channel. The biggest highlight of this product is the data storage and processing, as well as the visual graphical interface, which can display the current status more conveniently and intuitively, save all the data, and facilitate the analysis of the product after the test.
The ZC75 series AC and DC withstand voltage/insulation resistance tester is a newly designed 200VA power with a maximum output of 10kV/20mA, which meets the requirements of high withstand voltage testing. Based on the basic AC, DC, and insulation resistance tests, the ZC75 series adds a breakdown voltage test function, which can analyze the breakdown point voltage of the product; It has an open and short circuit detection function (OSC), which solves the problem of users when testing safety products. For reliability and accuracy issues, the contact check is performed synchronously during output to avoid missed detection and improve the reliability and efficiency of the test.
The ZC71 (D) series AC and DC withstand voltage/insulation testers are the upgraded products of the company's ZC71 series products. The instrument uses linear amplification technology to produce a low-distortion sine wave output, making the test more accurate. The use of a 4.3-inch color LCD screen and a user-friendly interactive operation mode make it clearer and easier for users to understand. The test results and test conditions are displayed at the same time, which makes users feel at ease about the test conclusions. The instrument can be widely used in fields that require safety testing.
ZC6061/ZC6062 series electret microphone tester adopts advanced digital circuit design technology. It is mainly used to measure the sensitivity of electret microphones at 100Hz, 1kHz, 5kHz frequency points on the production line, so as to detect the classification and match according to the sensitivity. The 100Hz, 1kHz, and 5kHz signals are indicated by three indicators respectively, which can be indicated simultaneously or separately. 100Hz and 5kHz can not only indicate the sensitivity, but also indicate their frequency response relative to 1kHz. When the frequency response exceeds the set value, there will be sound and indicator lights respectively. The instrument is easy to operate, fast and accurate readings, high test efficiency, and also has internal calibration and acoustic calibration functions. It is especially suitable for the inspection and use of the electret microphone production line and the purchased parts of the telephone manufacturer, and has the HANDLER interface and RS-232 interface options, which can be connected to the automatic testing machine for rapid testing.
Adopt pulse test, three kinds of pulse amplitude options
Polarity sound and light indicators, positive and negative alarm polarity can be selected
External test signal can be connected, and pure tone detection can be performed at the same time of polarity test
ZC71 series program-controlled AC and DC withstand voltage/insulation testers are the company's safety products. The instrument uses linear amplification technology to produce a low-distortion sine wave output, making the test more accurate. The use of a 16×2 large-character LCD display screen and a user-friendly interactive operation mode make it clearer and easier for users to understand. The test results and test conditions are displayed at the same time, which makes users feel at ease about the test conclusions. The instrument can be widely used in fields that require safety testing.
The ZC1320 audio frequency sweep signal generator is a power instrument that adopts the latest electronic technology at home and abroad and uses a novel voltage-controlled RC oscillator to generate a pure sine wave signal. This instrument adds the function of MP3 player on the basis of the original ZC1316 series, which can meet the increasing test requirements of R&D, experiment, and production. It can store customer's noise, EQ signal, music signal and other complex signals for playback according to requirements. . The output voltage and frequency of the output waveform of this series of instruments are all displayed by digital tubes, and all working parameters are set by buttons and potentiometers. It has the advantages of sweeping frequency range up to 1:1000 or more, high output power (up to 100W), and low waveform distortion. The power amplifier has functions such as power-on delay output, over-temperature protection, short-circuit protection, overload current-limiting protection, over-amp output protection, over-temperature display and overload display.
ZC6012 multi-channel power amplifier is a special power amplifier specially designed for speaker reliability test. The whole machine has 10 independent power amplifier channels, the maximum power of a single channel is 40W, and the maximum output peak voltage is 55V, which can fully meet the test requirements of the rated noise power and maximum power of small and medium power speakers. It can also be combined with our company's ZC6221 programmable noise generator/filter to carry out a variety of speaker power life tests.
The ZC5990D loudspeaker F0 tester is a special test equipment with very good test accuracy, accuracy and stability. When the test frequency range is set to 400Hz, the resolution can reach 1Hz. The smaller the test frequency range, the higher the resolution, which is very beneficial to the F0 test of the low frequency loudspeaker (box). A 4.3-inch color LCD screen is used, which can directly display the F0 curve of the speaker.
Contact Info
Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China
Sales:086519-8513 9371
Telephone:+86 18861190929
Mailbox:sales@zctek.com.cn
For more operation videos, please pay attention to the public number of Zhongce.
Copyright©2023 Changzhou Zhongce Instrument Co., Ltd. Powered by:www.300.cn Label
Copyright©2023 Changzhou Zhongce Instrument Co., Ltd.
Powered by:www.300.cn Label
Business License
-
◆ Electroacoustic device test equipment
◆ Electrical safety testing equipment
◆ Component parameter test equipment
◆ DC low resistance test equipment
◆ Signal distortion meter test equipment
◆ New energy battery test equipment
◆ Transformer, motor, coil test equipment
◆ Airtightness and Waterproof Test Equipment