- PRODUCT CATEGORY
The ZC2516C series intelligent low resistance tester is dedicated to testing various resistances. The 24-bit color 4.3-inch color LCD screen with touch function has a refreshing interface and convenient operation; the highest resistance measurement accuracy of 0.05% and the minimum resistance resolution of 1uΩ are suitable for Relay contact resistance, connector plug-in resistance, wire resistance, printed board circuit and solder hole resistance, etc.; its ultra-high-speed test speed and can output 3 levels of comparison result signals with different boundaries through the handler interface, which is convenient for automatic operation on the production line .
ZC2515 DC low resistance tester is a high-precision, wide-range, high-speed DC low-resistance tester. Its higher performance, convenient operation, and exquisite appearance are enough to compare with the competitive products on the market. The ZC2515 series DC resistance tester adopts the current mainstream placement technology, which has higher stability. The 24-bit color 4.3-inch color LCD screen with touch function has a refreshing interface and convenient operation; the highest resistance measurement accuracy of 0.01% and the smallest resistance of 0.1uΩ The resolution is second to none in the country. It is suitable for relay contact resistance, connector plug resistance, wire resistance, printed circuit board and solder hole resistance, etc.: It eliminates the potential error caused by the influence of thermoelectric contact on the component under test. ; Temperature compensation and temperature conversion function to avoid the influence of ambient temperature on the test work; offset voltage compensation function can effectively eliminate the EMF and contact potential difference of the DUT: its ultra-high-speed test speed and 10 different boundaries can be output through the handler interface The comparison result signal is convenient for automatic operation on the production line. The ZC2515 series provides almost all mainstream interface functions, which can facilitate data communication and remote control with a PC.
The ZC2518 series resistance/temperature scanner simulation test scanning unit adopts the design concept of synchronous plug-in card type, which can support up to 6 plug-in board test units, and realizes synchronous measurement between the plug-in boards, which greatly improves the scanning measurement speed. The temperature compensation and temperature conversion function of the instrument makes the product test free from the influence of ambient temperature, and can output the comparison and sorting results of the whole machine level, the board level and each channel, so that your test, data analysis and processing, and product sorting work more Easy. The standard RS232, USB HOST, USB Device and HANDLER interfaces not only facilitate the quick storage of your measurement data, but also facilitate your remote control of the instrument. The 24-bit color LCD screen with touch function and resolution of 480×272 is easy to operate and easy to understand. Chinese and English are optional, suitable for different usage scenarios.
ZC2512/A/B DC low resistance tester is an intelligent, wide-range, high-precision DC resistance tester, suitable for transformers and inductor windings, relays, switches, connector contact resistance, wire resistance, component solder joints Contact resistance, printed board line and solder hole resistance, metal flaw detection, etc. Applied to the production line. HANDLER interface and GPIB interface (optional) can be used to output good/bad product signals to improve the automated testing capabilities of the production line.
The ZC2511/ZC2513/ZC2513A DC low-resistance tester is a four-terminal measurement method specially used to measure low DC resistance. This product has simple comparison function, convenient setting and intuitive display. It can be widely used to measure the resistance of various coils, winding resistance of motors and transformers, wire resistance of cables, contact resistance of switches, plugs, sockets and other electrical appliances and metals. Riveting resistance.
The ZC2516 series of intelligent low resistance testers are dedicated to testing various resistances. The 24-bit color 4.3-inch color LCD screen with touch function is easy to operate and fast. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three additional sorting functions. In the sorting state, the resistance value or the percentage value can be selected to be displayed, and the resistance value can be judged to be too large, too small or good according to the set value. There is a sorting interface on the rear panel of the instrument, enabling the interface start signal to make the instrument perform measurement, and the test result is output from the interface on the rear panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. . In addition, the machine has a USB interface and a Handler port. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer through the USB interface or the USB interface for storage, or the data can be directly stored in the U disk for storage.