Product-Product-Changzhou Zctek Instruments Co., Ltd

PRODUCTS

Home page

PRODUCTS: PRODUCT CATEGORY

86-519-8513 9371

Fax: 86-519-85120170-8017

E-mail: sales@zctek.com.cn

Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China.

Contact Now

ZC6221 programmable noise signal generator/filter is a new type of programmable noise signal generator/filter specially designed by our company. It is used to measure the noise power, long-term maximum power, short-term maximum power and other parameters of many electro-acoustic components such as speakers.

ZC6221 Programmable Digital Filter/Signal Generator

ZC5990B loudspeaker F0 tester is a special test equipment with very good test accuracy, accuracy and stability. When the test frequency range is set to 400Hz, the resolution can reach 1Hz. The smaller the test frequency range, the higher the resolution, which is very beneficial to the F0 test of the low frequency loudspeaker (box). A 4.3-inch color LCD screen is used, which can directly display the F0 curve of the speaker.

ZC5990B loudspeaker F0 fast tester

Adopting direct digital synthesis (DDS) technology and chip component production process, it has the characteristics of high resolution, high precision, and high reliability. It has safety functions such as start-up delay output, short-circuit current limit protection, and over-range output protection. The simple and practical panel design meets the mass testing requirements of the production line.

ZC1212 series audio frequency sweep signal generator

Using microprocessor control and digital measurement technology Frequency and impedance dual display window Use constant current method to test. A total of five constant test currents Built-in voltage controlled oscillator, test frequency can be set arbitrarily

ZC2893A Impedance Tester

Coil products (such as transformers, motors, etc.) due to winding materials, magnetic materials, frameworks, processing technology and other factors will cause the insulation performance of the coil layer, turn and pin to drop. ZC2883/ZC2882 series impulse coil tester is a new generation of insulation performance tester for coil products developed by high-speed sampling technology, which can provide test solutions for most coil products. ZC2883 stores the sampled waveform of the standard coil in the instrument, and compares the measured waveform with the standard waveform during testing, and judges the tested coil according to the four waveform discrimination methods set (area, area difference, phase difference, corona, etc.) The pros and cons.

ZC2883 Pulse Coil Tester

The high-frequency precision bridge is a multi-function component tester for testing various electronic components. It uses the most popular 7-inch 800x480 color TFT LCD display, which enables users to read test results more intuitively and comfortably. It is an impedance measuring instrument with high speed, wide test range and 6-bit test resolution, which can meet the requirements of production line quality assurance, incoming inspection and laboratory measurement.

ZC2876/ZC2877/ZC2878 high frequency LCR digital bridge

Coil products (such as transformers, motors, etc.) due to winding materials, magnetic materials, frameworks, processing technology and other factors will cause the insulation performance of the coil layer, turn and pin to drop. ZC2883/ZC2882 series impulse coil tester is a new generation of insulation performance tester for coil products developed by high-speed sampling technology, which can provide test solutions for most coil products. ZC2882 adopts a real-time comparison method. The instrument alternately applies impulse voltage with specified peak value and wavefront time to the DUT and standard parts of the same design. By comparing the difference between the two oscillating waveforms, the insulation between the coils can be judged. Good or bad.

ZC2882 Pulse Coil Tester

This series of distortion measuring instruments is the company's newly designed all-digital automatic distortion measuring instrument series products. Its minimum distortion measurement reaches 0.005%, and the measurement frequency of the distortion signal reaches 150kHz. It is a smart with high performance/price. Type instrument.

ZC4137/ZC4136/ZC4135 digital high-precision distortion tester

< 1 2 3 4 >

Contact Info

Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China
Sales:086519-8513 9371
Telephone:+86 18861190929
Mailbox:sales@zctek.com.cn

For more operation videos, please pay attention to the public number of Zhongce.