语言 Language 语言
please try again.
All Product Categories
products
product category
All Product Categories
Related Products
Feedback
Username used for comment:
Feedback
Description:
验证码
Number of views:
1000

ZC5841B Motor Tester

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Description
Parameters

Brief introduction

ZC5841B is a multi-channel stepping motor life test instrument. The stepping motor is controlled by pulse signals and converts the point pulse signals into corresponding angular displacement and linear displacement micromotors. It is widely used in printers and other office equipment and various Kind of control device. The stepper motor is different from the general motor. The stepper motor cannot rotate when connected to the power supply, and it only rotates a certain angle every time a point pulse is added. In addition, when changing the pulse frequency, the speed of the stepping motor also changes. In order to monitor the running status of the stepper motor in real time, ZC8541B designed the motor parameter measurement function for the drive, which can obtain the running parameters of the motor in real time by monitoring the working voltage and working phase current of the motor to ensure the safe and stable operation of the motor.

Scope of application

Stepper motor, etc.

Technical index

Model

ZC5841B

Maximum number of connectable channels

There are 20 channels, divided into two groups. Channels 1~10 are one group, and channels 11~20 are another group. The test parameters of each group can be set independently. The voltage of each channel can be automatically corrected

Operating mode

Cyclic and continuous two methods; can realize customized test by setting forward rotation time, forward rotation stop, reverse rotation time, reverse rotation stop, number of runs, number of cycles, cycle time, nested cycle and other parameters.

Step subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, 1/32 step

Channel management

Each group of channels can start, stop or continue related tests at any time.

Real-time monitoring function

20 channels of simultaneous monitoring, the test progress bar, countdown times, voltage,

current and status can be displayed on the screen in real time.

Fault warning

The 20 LEDs on the panel display the location of the fault channel, and the cause of the fault is displayed on the screen at the same time.

HMI

7-inch color LCD display, touch screen + keyboard shortcut input, Chinese interface.

Test voltage

3.00V~12.00V; (0.01V step)

Drive frequency

1PPS ~10000PPS

Infrared detection

20-channel infrared detection, two-way mounting of lifting motor, two-way infrared sensor

Failure judgment

Number of consecutive failures

Data storage

U disk to save data

We could not find any corresponding parameters, please add them to the properties table

Related file download

Categories:
Download
File size:
915KB
2021-04-12 12:44:00
Dependent population:
All
Page up
1
Copyright © 2021 Changzhou Zctek Instruments Co., Ltd. 苏ICP备2021014748号-1 Powered by: www.300.cn IPv6 is supported
返回顶部