PRODUCTS

undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

ZC2883 Pulse Coil Tester

Coil products (such as transformers, motors, etc.) due to winding materials, magnetic materials, frameworks, processing technology and other factors will cause the insulation performance of the coil layer, turn and pin to drop. ZC2883/ZC2882 series impulse coil tester is a new generation of insulation performance tester for coil products developed by high-speed sampling technology, which can provide test solutions for most coil products. ZC2883 stores the sampled waveform of the standard coil in the instrument, and compares the measured waveform with the standard waveform during testing, and judges the tested coil according to the four waveform discrimination methods set (area, area difference, phase difference, corona, etc.) The pros and cons.

Key words:Electronic testing and measuring instruments

Product Consulting

Brief introduction

Coil products (such as transformers, motors, etc.) due to winding materials, magnetic materials, frameworks, processing technology and other factors will cause the insulation performance of the coil layer, turn and pin to drop.
ZC2883/ZC2882 series impulse coil tester is a new generation of insulation performance tester for coil products developed by high-speed sampling technology, which can provide test solutions for most coil products.
ZC2883 stores the sampled waveform of the standard coil in the instrument, and compares the measured waveform with the standard waveform during testing, and judges the tested coil according to the four waveform discrimination methods set (area, area difference, phase difference, corona, etc.) The pros and cons.

Performance characteristics

  • ZC2883 storage comparison pulse coil tester
  • Using advanced digital signal processing technology
  • Low inductance test, minimum 10uH, low energy test, no damage to the coil
  • Maximum 20MSPS sampling rate
  • 320×240 dot matrix graphic LCD display

Technical index

Model

 ZC2883

Measurement methods

Comparison of measured waveforms with stored standard waveforms

Pulse voltage range

300V-5000V

Pulse voltage accuracy

±5%

Pulse voltage step

100V

Pulse high voltage control

Switching power supply is controlled by MCU

Number of impacts

Single EXT (including multiple times 1-99), continuous INT

Trigger method

Manual, Foot control

Detection and judgment method

Area, area difference, phase, corona discharge

Repeatability

Area: ±1%, area difference: ±1%

Inductance test range

≥10uH

Maximum sampling rate

20MSPS

Waveform storage capacity range

100 waveforms and parameters

Monitor

320×240 dot LCD screen
240×200 point waveform display

Discriminant output

PASS/FAIL display, alarm

Dimensions

315mm×165mm×320mm

Weight

About 6kg

Related file download

ZC2883 manual

364.3KB

Product Consulting

Our staff will contact you within 24 hours (working days)! If you need other services, please call the service hotline:086519-8513 9371