Language 
PRODUCTS
- PRODUCTS
- PRODUCT CATEGORY
Fax: 86-519-85120170-8017
E-mail: sales@zctek.com.cn
Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China.
ZC2683F insulation resistance tester is a measuring instrument for measuring the insulation performance of electronic components, dielectric materials, equipment, wires and cables. The instrument is controlled by a single chip microprocessor, which is easy to operate and has complete functions. It has the characteristics of wide measuring voltage range and fast speed. The instrument adopts a 24 bit 4.3 inch color LCD with touch function, which is simple to operate and fast to test. It can intuitively display the output terminal voltage, measuring range resistance, insulation resistance of the tested object and other parameters. The instrument has the functions of automatic range or locking, sorting output and external trigger input interface, which makes the test more direct, convenient and reliable. The machine has a USB interface, and the panel function can be completely controlled by the computer. The test results can also be sent back to the computer for saving through the USB interface, or the data can be directly stored in the USB disk for saving.
ZC2516D series intelligent low resistance tester is specially used to test various resistances. The 24 bit color 4.3 inch color LCD screen with touch function is simple in operation and fast in testing. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three gear sorting function. In the sorting state, the resistance value or percentage value can be selected to display, and the resistance value can be judged as too large, too small or good according to the set value. At the same time, there is a sorting interface on the back panel of the instrument to enable the interface to start the signal and enable the instrument to measure. The test results are output from the interface on the back panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. In addition, the machine has a USB interface and a Handler interface. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer for saving through the USB interface or USB interface, or the data can be directly saved in a USB flash disk.
ZC2516S series intelligent low resistance tester is specially used to test various resistances. The 24 bit color 4.3 inch color LCD screen with touch function is simple in operation and fast in testing. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three gear sorting function. In the sorting state, the resistance value or percentage value can be selected to display, and the resistance value can be judged as too large, too small or good according to the set value. At the same time, there is a sorting interface on the back panel of the instrument to enable the interface to start the signal and enable the instrument to measure. The test results are output from the interface on the back panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. In addition, the machine has a USB interface and a Handler interface. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer for saving through the USB interface or USB interface, or the data can be directly saved in a USB flash disk.
ZC74 series AC/DC withstand voltage/insulation resistance tester is a product suitable for automatic testing of production lines launched by our company. On the basis of the original design, it has made higher requirements for stability, communication convenience and other functions, and enhanced anti-interference capability. It not only facilitates the early production debugging, but also greatly increases the stability of the product in the operation process, escorts the continuity of automatic production, and ensures the production efficiency of customers. This instrument is mainly used in the field of safety regulation testing of production line automation, and is a key process for product quality control.
Mid-range capacitance measuring instrument with improved performance
Good test stability
Strong impact resistance
Reasonable function configuration
ZC28XXD series LCR digital bridge is the new generation product of our company's newly developed low-frequency component measuring instrument, which applies the latest technology of multiple component measurement, special LCD display for large characters, SMD patch technology, convenient operation and beautiful appearance. It can directly measure up to six component parameter combinations, which can meet the needs of production line quality assurance, incoming inspection and automated production.
The RS-232 interface can provide users with remote control and statistics and analysis of test data. The HANDLER interface can be connected to an automatic component sorting system.
Mid-range inductance measuring instrument with improved performance
Reasonable combination of simple operation and powerful functions
Good reading stability
Up to 16 times/sec measurement speed
The ZC55 series lithium battery short-circuit tester is a fast switching power supply principle, which can charge and discharge the tested product quickly, automatically discharge after the test is completed, and has the test terminal contact reliability test function and the short-circuit test function before the product test. The instrument is controlled by a single-chip microprocessor, which is easy to operate and has complete functions. It has the characteristics of wide measuring voltage range and fast speed. The instrument adopts a 24-bit color 4.3-inch color LCD screen with touch function. It is easy to operate and fast. It can intuitively display the output voltage, measuring range resistance, and insulation of the measured object. For parameters such as resistance, the instrument has functions such as automatic range or lock, sorting output and external trigger input interface, making the test more direct, convenient and reliable. This machine has a USB interface and an RJ45 interface. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer through the USB interface or RJ45 interface for storage, or the data can be directly stored in a U disk for storage.
ZCFA50 series full-function air tightness detector is a high-performance air tightness detector newly launched by the company. On the basis of inheriting the many strong functions of the original product, it adds new functions such as sealing product testing and blasting testing. At the same time, it performs exceptionally well in structural design, software design, and algorithm. It is a cost-effective product. This air-tightness detector can be used in industries such as waterproof testing, electronic products, medical equipment, food packaging, auto parts, new energy, and military accessories.
The W710G real water leak tester is a pressure seal tester that simulates the product in a water depth of 0-10 meters. It is mainly aimed at the situation where the product with a waterproof and breathable membrane cannot be used for air-tight leak detection.
ZC9900 series AC and DC withstand voltage insulation tester is a high-performance tester using brand new technology. Its unique current protection function and high-precision output voltage enable the instrument to provide more accurate and faster tests while ensuring safety. The maximum 8 channels of withstand voltage output can better meet the all-round requirements of customers! ZC9900 series withstand voltage testers are mainly used for the safety performance testing of instruments, equipment and components!
ZCLK-001A Acoustic Laser Analyzer can test the performance parameters of electroacoustic products, including frequency response curve, impedance curve, harmonic distortion, intermodulation distortion, abnormal sound test, etc.
Among them, the abnormal sound test is the weakness of the traditional test system. The so-called rub and buzz refers to the annoying noise generated when the speaker is tested with a sweep signal, which is caused by the nonlinearity of the system. The abnormal sound is mostly caused by the manufacturing defects of the speaker, such as loose diaphragm, loose coil, non-center diaphragm, coil friction, air leakage or other defects. These defects cause short pulses to have a sudden change in instantaneous energy, resulting in disturbing noises. The trained listener can distinguish the abnormal sound effectively, but it requires a lot of manpower and material resources, and hearing fatigue will reduce the accuracy of the test, so it is not suitable for product testing on the production line.
Contact Info
Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China
Sales:086519-8513 9371
Fax: 0519-85120128 to 8017
Mailbox:sales@zctek.com.cn
For more operation videos, please pay attention to the public number of Zhongce.
Copyright©2023 Changzhou Zhongce Instrument Co., Ltd. Powered by:www.300.cn Label
Copyright©2023 Changzhou Zhongce Instrument Co., Ltd.
Powered by:www.300.cn Label
Business License
-
◆ Electroacoustic device test equipment
◆ Electrical safety testing equipment
◆ Component parameter test equipment
◆ DC low resistance test equipment
◆ Signal distortion meter test equipment
◆ New energy battery test equipment
◆ Transformer, motor, coil test equipment
◆ Airtightness and Waterproof Test Equipment