语言 Language 语言

products

All Product Categories
products
product category
All Product Categories
Related Products
Feedback
Username used for comment:
Feedback
Description:
验证码
Number of views:
1000

ZCFA50 series air tightness tester

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
0
Description
Parameters

Brief introduction:

ZCFA50 series full-function air tightness detector is a high-performance air tightness detector newly launched by the company. On the basis of inheriting the many strong functions of the original product, it adds new functions such as sealing product testing and blasting testing. At the same time, it performs exceptionally well in structural design, software design, and algorithm. It is a cost-effective product. This air-tightness detector can be used in industries such as waterproof testing, electronic products, medical equipment, food packaging, auto parts, new energy, and military accessories.

  • 1. Test pressure: display the test pressure of the product being inspected
  • 2. Test result: display the leakage data of the tested product
  • 3. Precision pressure reducing valve: adjust the test pressure and increase it clockwise (the pressure reducing valve of the negative pressure instrument is installed on the rear panel)
  • 4. Test result judgment: NG means unqualified indicator, OK means qualified, PNG means the test pressure exceeds the limit
  • 5. Keyboard
  • 1. Power switch: turn on or off the power of the instrument
  • 2. RS485 data interface: used for real-time data transmission, from top to bottom are A, B, GND
  • 3. Network socket: for data transmission
  • 4. Input and output terminals: instrument start and stop control
  • 5. Power socket: connect to DC24V power supply 2A
  • 6. RS232 data interface: data transmission, pins 2-RXD, 3-TXD, 5-GND
  • 7. T end: test interface, connected to the tested product, R end: standard pressure comparison end
  • 8. Air source: 0.5 ~ 0.8MPa stable and clean air source, connected to the inside of the instrument through a filter
  • 9. Matching cavity interface: During the fully sealed inspection, select the matching cavity according to the size of the inner cavity of the tested part

 

Function selection:

1

Technical Parameters

ZCFA50 series air tightness tester

Differential pressure

Resolution

  0.1Pa or 0.001ml/min

Sensor range

±2500Pa 、±5000Pa

Display range

±500Pa、± ±999Pa 、±2000Pa

Sensor accuracy

±0.05% of F.S.

Test pressure

Resolution

 0.1kPa (<1000kPa )1kPa (>1000kPa )

Display range

-85 ~-3kPa 、3 ~85kPa 、3 ~99.9kPa 、5 ~200kPa 、5 ~400kPa 、

 

5 ~700kPa 、0.05 ~1.2MPa 、0.05 ~1.8MPa 、0.05 ~2.5MPa

Precision

±0.15% of F.S.

Differential pressure unit

 Pa ,mbar ,mmHg ,Pa/s ,ml/min ,cc/min ,SCCM etc.

Test pressure unit

 KPa,MPa,psi,kgf/cm²,bar,mbar,mmH2O,inH2O,atm etc.

Time

Predetermined area:0.0~999.9sec Minimum time unit 0.1sec

Program

10 groups (independent parameter settings for each group)

power supply

 DC24V  Power consumption 25W

Driving air source

 0.5~0.8MPa  Clean and dry air

Piping connection diameter

(Test pressure source) Φ6  (Test piece port) Φ6

Display

 3.5 inch TFT  True color LCD screen

Input control interface

6  Passive input

Output control interface

6  Relay contact output

Communication Interface

 RS232 RS485 USB

Operating temperature, humidity

 5 ~40 ℃, 45 ~85 %RH  No condensation

Weight

approximately 5.90kg

Size

 305D*198W*140H(mm)

We could not find any corresponding parameters, please add them to the properties table

Related file download

Categories:
Download
File size:
21KB
2021-04-12 12:42:00
Dependent population:
All
Page up
1
Copyright © 2021 Changzhou Zctek Instruments Co., Ltd. 苏ICP备2021014748号-1 Powered by: www.300.cn IPv6 is supported
返回顶部