- products
- product category
ZC2516D DC low resistance tester
Brief introduction
ZC2516D series intelligent low resistance tester is specially used to test various resistances. The 24 bit color 4.3 inch color LCD screen with touch function is simple in operation and fast in testing. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three gear sorting function. In the sorting state, the resistance value or percentage value can be selected to display, and the resistance value can be judged as too large, too small or good according to the set value. At the same time, there is a sorting interface on the back panel of the instrument to enable the interface to start the signal and enable the instrument to measure. The test results are output from the interface on the back panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. In addition, the machine has a USB interface and a Handler interface. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer for saving through the USB interface or USB interface, or the data can be directly saved in a USB flash disk.
Performance characteristics
- Basic accuracy: ± 0.05% ± 2 characters
- Minimum resolution of resistance: 1 u Ω
- With low voltage test mode, effectively protect the tested part
- Two display modes: direct reading of resistance value or percentage value
- Sorting function: LOW, PASS, HIGH, Handler and signal output
- Measuring speed: fast 20 times/second, medium 10 times/second, slow 2.5 times/second
- USB interface function
- U disk interface function
- Panel key reset function
Technical indicators
Model |
ZC2516D |
||
Electrometric display |
4.3 inch 24 bit color LCD with touch function |
||
Reading digits |
4 ½position |
||
Measuring range |
1µΩ~2MΩ |
||
Resistance range |
Current |
Resolution |
Accuracy |
20mΩ |
1A |
1µΩ |
0.100+3 |
200mΩ |
1A |
10µΩ |
0.05+2 |
2Ω |
10mA |
100µΩ |
0.05+2 |
20Ω |
10mA |
1mΩ |
0.05+2 |
200Ω |
1mA |
10mΩ |
0.05+2 |
2KΩ |
100µA |
100mΩ |
0.05+2 |
20KΩ |
100µA | 1Ω | 0.05+2 |
200KΩ |
10µA |
10Ω | 0.05+2 |
2MΩ |
1µA |
100Ω |
0.2+2 |
Test end configuration |
Four ends |
||
Range switching |
Auto/Manual |
||
Trigger mode |
Internal, manual, external, bus |
||
Low voltage measurement |
Open circuit voltage ≤ 20mV, current ≤ 10mV Effective range: 2 Ω, 20 Ω, 200 Ω, 2K Ω |
||
Comparison test |
|||
Comparator |
Signal output |
HI/IN/LO | |
A ringing signal | Calling mode:OFF,IN,HI/LO | ||
Limit setting mode | Upper/lower limit of absolute value, upper/lower limit of percentage+nominal | ||
Sorting |
3rd gear, absolute value/percentage |
||
Interface configuration |
USB DEVICE、USB HOST、HANDLER |
||
Volume | 270mm*110mm*370mm | ||
Net weight | 3.65KG |
Related file download
- Produt Series ◆ Electroacoustic device test equipment ◆ Electrical safety testing equipment ◆ Component parameter test equipment ◆ DC low resistance test equipment ◆ Signal distortion meter test equipment ◆ New energy battery test equipment ◆ Transformer, motor, coil test equipment ◆ Airtightness and Waterproof Test Equipment

-
◆ Electroacoustic device test equipment
◆ Electrical safety testing equipment
◆ Component parameter test equipment
◆ DC low resistance test equipment
◆ Signal distortion meter test equipment
◆ New energy battery test equipment
◆ Transformer, motor, coil test equipment
◆ Airtightness and Waterproof Test Equipment
-
Market Phone
86-519-85139371 -
Sales Call
Mr. Wang: +86 15861176170 Miss Lu: +86 13685211385 Mr. Pan: +86 18551080770