PRODUCTS

Home page

PRODUCTS: PRODUCT CATEGORY

Related Products

ZC2518 Resistance/Temperature Scanning Tester

The ZC2518 series resistance/temperature scanner simulation test scanning unit adopts the design concept of synchronous plug-in card type, which can support up to 6 plug-in board test units, and realizes synchronous measurement between the plug-in boards, which greatly improves the scanning measurement speed. The temperature compensation and temperature conversion function of the instrument makes the product test free from the influence of ambient temperature, and can output the comparison and sorting results of the whole machine level, the board level and each channel, so that your test, data analysis and processing, and product sorting work more Easy. The standard RS232, USB HOST, USB Device and HANDLER interfaces not only facilitate the quick storage of your measurement data, but also facilitate your remote control of the instrument. The 24-bit color LCD screen with touch function and resolution of 480×272 is easy to operate and easy to understand. Chinese and English are optional, suitable for different usage scenarios.

Classification:

DC low resistance test equipment

Key words:Electronic testing and measuring instruments

Product Consulting

Brief introduction

Performance characteristics

Resistance range: 10uΩ- 200kΩ
The highest resistance accuracy: 0.05%, resistance resolution: 10uΩ
Basic accuracy of temperature: 0.2℃
The highest test speed can reach 600 times per second
15 channels/unit, 6 units simultaneous measurement, up to 90 resistance single-unit or scan test
For each channel measurement, the sorting comparison boundary can be designed separately and the output comparison sorting signal can be output
The test terminal used in the scan test path is programmable
Each test unit can be plugged and unplugged freely
Temperature compensation function (TC)
One-click screenshot function
Data logging function
Temperature measurement can support three temperature sampling methods of PT100, PT500, and analog voltage
Can output channel-level, board-level, machine-level comparison and sorting results (over-limit, qualified, and beep)
The instrument operating software can be automatically upgraded via USB HOST
Handler interface is used to realize online operation

Technical index

Type number	ZC2518
Measurement parameters	DC resistance, temperature
Resistance test range	10uΩ-200kΩ
Basic resistance test accuracy	0.05%
Resistance range	Automatic and manual（200mΩ，2Ω，20Ω，200Ω，2kΩ，20kΩ，200kΩ）
Temperature sensor type	PT500 platinum resistance, PT100 platinum resistance, analog voltage input
Temperature test range	PT100，PT500：-99℃-250℃
Temperature test range	Analog：0V—2V
Temperature test accuracy	PT100，PT500：0.3%*Measurements ±0.5℃
Temperature test accuracy	Analog：±1%Rd ± 3mV
Measurement mode	Stand-alone, scan
Each test parameter	Resistance, temperature (programmable)
Scanning channels	15 channels/card, up to 6 cards and 90 channels can be inserted, the channels in the card are for scanning test, and the test cards are for synchronous testing
Test end selection of test channel	Arbitrary configuration between channels (programmable)
Test current	≤100mA
Single board measurement speed	100Times/sec、40Times/sec、2Times/sec
6-board equivalent test speed	600Times/sec、240Times/sec、12Times/sec
monitor	True color 4.3 inch LCD display
show result	Simultaneously display 16-channel test results, support page turning
Short-circuit clearing correction	Supports full-range short-circuit clearing for all channels
Comparators	Each test channel sets the comparison boundary separately
Extreme mode	ABS、DEV、ABS、%
Trigger method	Automatic trigger, manual trigger, bus trigger, Handler trigger, foot switch trigger
interface	LAN、USB DEVICE、USB HOST、RS232C、Handler 、Foot switch
Test end	Four terminal test
Power requirements	Voltage：90-125V，190-250V frequency：50Hz、60Hz、Power: Maximum 30VA

ZC2512/ZC2512A/ZC2512B low resistance tester

ZC2515 DC Low Resistance Tester

Related file download

ZC2518

18.0KB

21.0KB

↓

Product Consulting

Our staff will contact you within 24 hours (working days)! If you need other services, please call the service hotline:086519-8513 9371

Contact Info

Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China
Sales:086519-8513 9371
Fax: 0519-85120128 to 8017
Mailbox:sales@zctek.com.cn

For more operation videos, please pay attention to the public number of Zhongce.