PRODUCTS

Home page

PRODUCTS: PRODUCT CATEGORY

Related Products

ZC2683F insulation resistance tester

ZC2516/ZC2516A/ZC2516B type low resistance tester

The ZC2516 series of intelligent low resistance testers are dedicated to testing various resistances. The 24-bit color 4.3-inch color LCD screen with touch function is easy to operate and fast. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three additional sorting functions. In the sorting state, the resistance value or the percentage value can be selected to be displayed, and the resistance value can be judged to be too large, too small or good according to the set value. There is a sorting interface on the rear panel of the instrument, enabling the interface start signal to make the instrument perform measurement, and the test result is output from the interface on the rear panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. . In addition, the machine has a USB interface and a Handler port. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer through the USB interface or the USB interface for storage, or the data can be directly stored in the U disk for storage.

Classification:

DC low resistance test equipment

Key words:Electronic testing and measuring instruments

Product Consulting

Brief introduction

Performance characteristics

Basic accuracy: ±0.05%±2 words
Minimum resolution of resistance: 1 uΩ
With low resistance test mode, effectively protect the DUT
Two display modes: direct reading of resistance value or percentage value
Sorting function: LOW, PASS, HIGH, Handler and signal output
Measurement speed: fast 20 times/sec, medium speed 10 times/sec, slow speed 2.5 times/sec
USB interface function
U disk interface function
Panel button reset function

Technical index

Model	ZC2516			ZC2516A	ZC2516B
Monitor	24-bit color 4.3-inch color LCD screen with touch function
Reading digits	4 ½ digits
Measuring range	1µΩ～2MΩ			10µΩ～200KΩ	1µΩ～20KΩ
Resistance range	Current	Resolution	Accuracy Rd%+word	Current	Resolution	Accuracy Rd%+word	Current	Resolution	Accuracy Rd%+word
20mΩ	1A	1µΩ	0.100+3	No			1A	1µΩ	0.100+3
200Ω	1A	10µΩ	0.05+2	1A	10µΩ	0.05+2	1A	10µΩ	0.1+2
2Ω	10mA	100µΩ		10mA	100µΩ		10mA	100µΩ
20Ω	10mA	1mΩ		10mA	1mΩ		10mA	1mΩ
200Ω	1mA	10mΩ		1mA	10mΩ		1mA	10mΩ
2KΩ	100µA	100mΩ		100µA	100mΩ		100µA	100mΩ
20KΩ	100µA	1Ω		100µA	1Ω		100µA	1Ω
200KΩ	10µA	10Ω		10µA	10Ω		No
2MΩ	1µA	100Ω	0.2+2	No			No
Test terminal configuration	Four ends
Range switching	automatic / manual
Trigger method	Internal, manual, external, bus
Low voltage measurement	Open circuit voltage ≤400mV effective range：2Ω，20Ω，200Ω，2KΩ
Comparative discrimination
Comparators				Signal output　　　 HI/IN/LO Signal ring　　 Beep mode：OFF， IN，HI/LO Limit setting method　 Absolute value upper/lower limit, percentage upper and lower limit + nominal value
Sorting				3 levels, absolute value/percentage
Interface configuration				USB DEVICE、USB HOST、HANDLER

ZC2516C low resistance tester (temperature compensation)

None

Related file download

ZC2516 (A, B) Tester Instruction Manual

888.5KB

↓

Product Consulting

Our staff will contact you within 24 hours (working days)! If you need other services, please call the service hotline:086519-8513 9371

Contact Info

Address: Room 420, Building 3, No. 18, Huashan Road, Changzhou, Jiangsu, China
Sales:086519-8513 9371
Fax: 0519-85120128 to 8017
Mailbox:sales@zctek.com.cn

For more operation videos, please pay attention to the public number of Zhongce.