

PRODUCTS
Related Products
ZC1681B-M Motor Life Tester
Classification:
Key words:Electronic testing and measuring instruments
ZC1681B-M multi-channel motor life tester is a multi-channel, multi-function motor test equipment, mainly for linear motor aging test. Built-in F0 test (sweep mode), sine wave sweep signal generator, dual-channel SD card signal source, in addition to two external signal input channels, two internal signal output channels, users can connect special filters and other signals Processing equipment, and feedback the processed signal to this equipment for related tests. The unique 8-segment cycle function, the start and stop time is accurate to the ms level. This model uses the test function of the motor resonance frequency F0 and the automatic sine wave signal tracking function, which can more conveniently determine the working status of the vibration motor. This machine adopts the overall module method of power amplifier + measurement + microcontroller, which improves the system performance Reliability and accuracy of the test.
Micro AC vibration motor, etc.
Model |
ZC1681B-M |
|
Maximum number of connectable channels |
There are 20 channels, divided into two groups. Channels 1~10 are one group, and channels 11~20 are another group. Each group of test parameters (including signal type)can be set independently. The voltage of each channel can be automatically corrected.
|
|
Test signal type |
Built-in dual-channel sine wave fixed frequency/sweep frequency generator, dual-channel SD player, external signal. Adapt to motor test requirements under different reference standards
|
|
Aging test time |
0000: 00: 00 ~ 9999: 59: 59, the maximum is 9999h, can be set arbitrarily |
|
Channel management |
Each channel can start, stop or continue related tests at any time |
|
Real-time monitoring function |
20 channels of simultaneous monitoring, each channel can periodically capture product F0 and drive it with F0 (the driving signal is pure sine wave), and the product F0 can be monitored every time period The frequency range of monitoring F0 is between 50Hz~350Hz When abnormal F0 is detected, stop this signal output in time
|
|
Channel fine-tuning function |
Can realize the independence between channels, each voltage can be individually fine-tuned and captured to F0 frequency fine-tuning |
|
Fault warning |
The 20 LEDs on the panel display the location of the faulty channel, and the cause of the fault is displayed on the screen at the same time |
|
HMI |
7-inch color LCD display, touch screen + keyboard shortcut input, Chinese interface |
|
Line output connection |
The signal output adjusted by the attenuator can be connected to an external power amplifier without volume control or an external digital filter. |
|
Signal access |
Various test signals customized by users can be connected |
Related file download
1.9MB
Product Consulting