语言 Language 语言

products

/
/
/
ZC1681B-ST multi-channel speaker life tester
All Product Categories
products
product category
All Product Categories
Related Products
Feedback
Username used for comment:
Feedback
Description:
验证码
Number of views:
1000

ZC1681B-ST multi-channel speaker life tester

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Description
Parameters

Brief introduction

The ZC1681B-ST multi-channel speaker life tester is a newly upgraded stand-alone version of the aging tester. The outstanding function is that the setting and operation are very simple, intuitive and clear, suitable for laboratory personnel to operate, the new internal structure, faster heat dissipation, and more stable quality , Higher reliability.

Scope of application

Mobile phone speakers, receivers, MP3, tablet computers, laptop speakers, low-power TV speakers, etc.

Features

  • Signal source: Built-in sine wave generator and sweep frequency controller, dual SD card signal output, two groups can be used for aging test of different signals
  • Two groups of voltages can be arbitrarily set up to 20 channels for simultaneous monitoring, automatically record and display voltage/current/DCR/temperature rise/test time and status
  • The test voltage is automatically corrected, the accuracy can reach ≤2%, and the display is 0.001V
  • 7-inch LCD panel, richer display content, larger fonts, easy to observe
  • Temperature rise measurement range: 0--200°℃, measurement accuracy ≤5%±1℃
  • Support multiple working modes for normal intermittent debugging, the smallest intermittent support 0.5S, and still can accurately measure voltage

Technical index

Model

ZC1681B-ST

Maximum number of connectable channels

20 channels, divided into two groups, channel 1~10 is one group, channel 11~20 is another group,

each group of test parameters (including signal type)can be set independently.

The voltage of each channel can be automatically corrected.

 

Aging test time

0000:00:00-9999:59:59,Maximum is 9999h,Can be set arbitrarily

Monitoring method

20 simultaneous monitoring, automatic recording and display

State judgment

Open circuit, short circuit or low impedance

Fault warning

The location of the faulty channel is displayed on the screen

Sine wave generator

Built-in sine wave generator

Test frequency range

20Hz ~ 20000Hz

Frequency accuracy

±0.05%

Frequency stability

Better than 60ppm

THD

≤0.5% @ 1k Sine

Sweep mode can be selected

Linear, logarithmic

Audio source format

MP3,WMA,WAV

Power amplifier

Maximum output power per channel

12W

Maximum total output power

300W

Frequency response

20Hz ~ 20000Hz(±0.25dB)

Load impedance

4Ω~ 120Ω

Maximum test current

≤1.500A

Adjustable range of output voltage

0.100 V ~ 12V(The adjustment accuracy is 0.001V)

Automatic voltage correction

Precision ≤2%

True RMS measurement voltage

Precision ≤2%

Temperature rise measurement

Range 0--200°C,Range ≤5%±1℃

Voice coil DCR resistance measurement

Range ≤0.5%(1Ω-40Ω)

We could not find any corresponding parameters, please add them to the properties table

Related file download

Categories:
Download
File size:
2.3M
2021-04-12 12:41:00
Dependent population:
All
Page up
1
Copyright © 2021 Changzhou Zctek Instruments Co., Ltd. 苏ICP备2021014748号-1 Powered by: www.300.cn IPv6 is supported
返回顶部