PRODUCTS

undefined
undefined
+
  • undefined
  • undefined

ZC2516D DC low resistance tester

ZC2516D series intelligent low resistance tester is specially used to test various resistances. The 24 bit color 4.3 inch color LCD screen with touch function is simple in operation and fast in testing. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three gear sorting function. In the sorting state, the resistance value or percentage value can be selected to display, and the resistance value can be judged as too large, too small or good according to the set value. At the same time, there is a sorting interface on the back panel of the instrument to enable the interface to start the signal and enable the instrument to measure. The test results are output from the interface on the back panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. In addition, the machine has a USB interface and a Handler interface. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer for saving through the USB interface or USB interface, or the data can be directly saved in a USB flash disk.

Key words:Electronic testing and measuring instruments

Product Consulting

Brief introduction

ZC2516D series intelligent low resistance tester is specially used to test various resistances. The 24 bit color 4.3 inch color LCD screen with touch function is simple in operation and fast in testing. It is suitable for various resistance design, inspection, quality control and production testing. This machine has three gear sorting function. In the sorting state, the resistance value or percentage value can be selected to display, and the resistance value can be judged as too large, too small or good according to the set value. At the same time, there is a sorting interface on the back panel of the instrument to enable the interface to start the signal and enable the instrument to measure. The test results are output from the interface on the back panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. In addition, the machine has a USB interface and a Handler interface. The panel function can be completely controlled by the computer. The test results can also be sent back to the computer for saving through the USB interface or USB interface, or the data can be directly saved in a USB flash disk.

Performance characteristics

  • Basic accuracy: ± 0.05% ± 2 characters
  • Minimum resolution of resistance: 1 u Ω
  • With low voltage test mode, effectively protect the tested part
  • Two display modes: direct reading of resistance value or percentage value
  • Sorting function: LOW, PASS, HIGH, Handler and signal output
  • Measuring speed: fast 20 times/second, medium 10 times/second, slow 2.5 times/second
  • USB interface function
  • U disk interface function
  • Panel key reset function

Technical indicators

Model

ZC2516D

Electrometric display

4.3 inch 24 bit color LCD with touch function

Reading digits

4 ½position

Measuring range

1µΩ~2MΩ

Resistance range

Current

Resolution

Accuracy
Rd%+word

20mΩ

1A

1µΩ

0.100+3

200mΩ

1A

10µΩ

0.05+2

10mA

100µΩ

0.05+2

20Ω

10mA

1mΩ

0.05+2

200Ω

1mA

10mΩ

0.05+2

2KΩ

100µA

100mΩ

0.05+2

20KΩ

100µA 0.05+2

200KΩ

10µA

10Ω 0.05+2

2MΩ

1µA

100Ω

0.2+2

Test end configuration

Four ends

Range switching

Auto/Manual

Trigger mode

Internal, manual, external, bus

Low voltage measurement

Open circuit voltage ≤ 20mV, current ≤ 10mV            Effective range: 2 Ω, 20 Ω, 200 Ω, 2K Ω

Comparison test

Comparator

Signal output

HI/IN/LO
A ringing signal Calling mode:OFF,IN,HI/LO
Limit setting mode Upper/lower limit of absolute value, upper/lower limit of percentage+nominal

Sorting

3rd gear, absolute value/percentage

Interface configuration

USB DEVICE、USB HOST、HANDLER

Volume 270mm*110mm*370mm
Net weight 3.65KG

Related file download

ZC2516C Low Resistance Tester

16.3KB

Product Consulting

Our staff will contact you within 24 hours (working days)! If you need other services, please call the service hotline:086519-8513 9371