PRODUCTS

undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

ZC5840 Motor Tester

The ZC5840 micro motor tester is a test equipment for the life aging of motors, etc. The internal core chip is professionally used for off-axis moment of inertia (ERM) and linear resonant actuator (LRA) (with built-in library and intelligent control Eng) Haptic drive. This series of devices uses a special LRA control algorithm called automatic resonance tracking. Automatic resonance tracking uses the back-EMF of the LRA to monitor and track the resonance frequency. Later, it can use this resonant frequency information to drive the closed-loop LRA. Automatic resonance has many benefits and makes LRA fusion simple: the rotor vibration is stronger and more consistent, the power consumption of the resonance drive is lower, it has the ability of over-speed driving and LRA braking to obtain better response time, which is the current test The most suitable method for the motor. Compared with the previous method of measuring F0 with a sine wave, and then using the corresponding F0 value to de-age the motor, the method has improved a lot.

Key words:Electronic testing and measuring instruments

Product Consulting

Brief introduction

The ZC5840 micro motor tester is a test equipment for the life aging of motors, etc. The internal core chip is professionally used for off-axis moment of inertia (ERM) and linear resonant actuator (LRA) (with built-in library and intelligent control Eng) Haptic drive. This series of devices uses a special LRA control algorithm called automatic resonance tracking. Automatic resonance tracking uses the back-EMF of the LRA to monitor and track the resonance frequency. Later, it can use this resonant frequency information to drive the closed-loop LRA. Automatic resonance has many benefits and makes LRA fusion simple: the rotor vibration is stronger and more consistent, the power consumption of the resonance drive is lower, it has the ability of over-speed driving and LRA braking to obtain better response time, which is the current test The most suitable method for the motor. Compared with the previous method of measuring F0 with a sine wave, and then using the corresponding F0 value to de-age the motor, the method has improved a lot.

Technical index

Model

ZC5840

Maximum number of connectable channels

40 channels, divided into two groups, channel 1-20 is one group, channel 21-40 is another group, each group of test parameters can be set independently, and each channel can be independently switched.

Drive voltage

0.10V~3.00V (adjustment accuracy 0.01V)

testing time

0~999.9h (Adjustment accuracy 0.1h)

Voltage compensation

0.01~1V

F0 upper and lower limits

0~999.9Hz

Restart time

1~999s

Cycles

0~99999 times (5 groups can be independently programmed)

Start stop time

0~999.9s (Adjustment accuracy 0.1s)

F0 measuring range

20~350Hz (measurement accuracy≤1%±1Hz)

Scope of application

Linear motors, etc.

Related file download

ZC5840 Operating Instructions

4.5MB

Product Consulting

Our staff will contact you within 24 hours (working days)! If you need other services, please call the service hotline:086519-8513 9371